Every spring, the same post shows up on every Austin neighborhood group: someone opens their City of Austin utility bill, sees the wastewater line, and experiences a plunge colder than Barton Springs in January. Nothing about their habits changed. Same showers, same dishes, same guilt-free refusal to water the lawn. And yet the wastewater charge jumped, and it stays jumped, month after month.
The culprit is usually not a billing error. It is a program called wastewater averaging, and it is one of the most consequential things about living in Austin that nobody explains when you move here. They will warn you about cedar fever and I-35. Nobody mentions that three winter meter readings quietly decide a year of your utility bill.
Three Winter Months Decide Your Whole Year
Here is the mechanism. Your water meter measures what comes into the house, but there is no meter measuring what goes down the drain. So Austin Water estimates your sewer use by averaging your water consumption across three consecutive winter months, roughly mid-November through mid-March, when most households are not irrigating, filling pools, or washing cars.
For the 2025-2026 period, the earliest windows opened November 13 and the latest closed March 12, depending on your billing cycle. Your exact dates follow the bill cycle number printed at the top left of your utility bill, and the city publishes the full schedule along with a wastewater averaging calculator.
Whatever you consume during that window, roughly 92 days, becomes your fixed monthly wastewater volume for the next twelve months. It will not go up if you fill a pool in July. But it also will not come down if the reason your winter usage was high happened to be a leak. And by Austin Water’s own explanation, wastewater is billed at higher rates than the drinking water itself, because treating what goes down the drain costs more than delivering what comes out of the tap.

The Leak Math Nobody Does Until April
Now add a leak to that window and watch the math get ugly. The EPA’s WaterSense program estimates a running toilet can waste up to 200 gallons per day. That is a toilet running more consistently than MoPac at 5 PM. Over a 92-day averaging period, one bad flapper can push more than 18,000 extra gallons through your meter, which works out to roughly 6,100 gallons added to your locked monthly average.
You then pay for that phantom water twelve times, at the higher wastewater rate, long after the toilet is fixed.
Toilets at least announce themselves if you listen. The quiet ones are worse. A pinhole slab leak under the foundation, the kind Austin’s expansive clay soil manufactures reliably, can run all winter without a sound while it inflates your averaging window and feeds moisture into your slab.
If your winter bills creep up with no explanation, professional leak detection can pinpoint the source without exploratory demolition, and a slab leak repair caught in October is dramatically cheaper than one discovered in a February bill.

How to Protect Your Averaging Window
The good news is that this system rewards anyone paying attention. Run this routine in early November, before your window opens, and you lock in the lowest possible average instead of a leak-inflated one.
Start with the 30-minute meter test: turn off every fixture and appliance, then watch the meter. If it moves, water is escaping somewhere. Drop food coloring into each toilet tank, wait half an hour without flushing, and check the bowl for color. Log into your My ATX Water portal while you are at it, since the city’s smart meters flag continuous flow, and a 24/7 trickle in that data is a leak introducing itself.
Then give the irrigation system the winter off. Your St. Augustine is dormant anyway, and every sprinkler run during the window is a donation to the wastewater fund. The city’s own leak detection tips cover the basics, and for anything the DIY checks cannot find, call 737-408-7885 before the meter reads that matter.

Already Locked Into a Bad Average?
If a leak got baked into your current average, do not just accept a year of overpaying quietly. Fix the leak first, since you are still paying for the wasted water itself every month either way. Keep the plumber’s invoice and your before-and-after meter readings, then contact City of Austin Utilities Customer Care at 512-494-9400 and ask what options exist for your situation. Adjustments are not guaranteed, but documentation is what makes the conversation possible.
And remember that a leak big enough to distort your bill has usually been doing quieter damage too. Moisture under a slab or inside a wall does not wait for billing season, and if water has been sitting anywhere it should not, water damage restoration from the same team that found the leak keeps a bad winter from becoming a bad year.
Mark your calendar for early November, run the checklist, and let the averaging window work for you instead of against you. Your future April self, opening that bill with a breakfast taco in hand, will be grateful. Call 737-408-7885 if this winter’s numbers already look wrong.

